The Basics of Concrete Driveway Installation

Concrete driveway installation is a job for the experts. Driveways require proper installation to look good and function for a very long time. Contractors should install them properly because everything that becomes of it depends on their workmanship and the quality of the materials used. 

Some of the things that are necessary for a well-installed concrete driveway are listed below. This list is going to be helpful if you intend to hire concrete driveway installation experts now or in the near future.  

  1. Correctly PreparedSubgrade

Quality subgrade will provide the necessary support for your driveway. To ensure that it is good enough, there should be uniformity in soil compaction and composition. Aside from adequate support, a well-prepared subgrade also ensures even thickness of the slab. It will also prevent the slab from settling and the entire structure from cracking.  

  1. Right ConcreteMix

It’s important to achieve the right concrete mix in order to ensure that the concrete driveway is strong, durable, and long-lasting. The overall performance of the concrete has a lot to do with the mix.  

  1. Properly PlacedJoints

The control joints of the concrete driveway should be placed with the ideal space setting to prevent cracking. If the driveway slab is 4 inches thick, then they must be placed at about 10 feet. Random cracks aren’t really structural issues but eyesores that can otherwise be avoided. Joint patterns that produce triangular and rectangular sections should also be avoided. The control joints should also be at the right depth, ideally one-fourth of a thickness of the slab.  

  1. AdequateSteel Reinforcement 

Its installation of steel reinforcement added structural strength to your driveway. This is necessary if the slab is exposed to increased load or traffic. While reinforcements aren’t going to prevent the occurrence of cracks, it will hold the driveway together in case they occur. Steel bars and wire mesh are the reinforcements that are commonly used on concrete driveways.    

  1. Ideal thickness

The thickness of the concrete is major factor to consider as it determines the structural capacity of the drivewayThe minimum thickness is four inches. If you want to increase the thickness another inch, add around 20% to the concrete density. Doing so will boost the load capacity of your driveway for up to 50%. Do this for areas that are going to bear heavy loads.   

  1. ProperFinishing 

One of the common mistakes when finishing concrete driveways is overworking it. You shouldn’t do any finishing operation if bleed water is apparent. The concrete finishing process is composed of three important steps. First, the contractor must strike off the concrete using a screen to make the surface uniform. Next, the concrete should be floated with wood to prevent the accumulation of bleed water. The last step is finishing the surface using a trowel.  

  1. ProperDrainage 

Water is not supposed to stand on the driveway. To ensure that rainwater will drain properly, the driveway must be sloped away from any structures and towards the street.  

  1. ProperCuring  

Once you’re done working with the concrete, let it cure properly. This is actually the final step of the entire process, and it is also the most important one.  

Submit a Comment

Your email address will not be published. Required fields are marked *